28 Jul
2018
28 Jul
'18
11:31 a.m.
Has anyone managed to get a router with at least 3 gigabit ethernet ports
to perform services like redundancy or load balancing using the multiwan
packet? I'd be interested in hearing your experience and a recommendation
of what to buy, and how to configure the ports. Guido (busy sailing these
days) told me that the hard part is configuring the ports, and that each
configuration is hardware-specific...
Has anyone tried with the tplink wr1043n? It's the cheapest gigabit machine
i have been able to find....
28 Jul
28 Jul
8:59 p.m.
On 07/28/2018 01:31 PM, Brian Russell wrote:
Has anyone managed to get a router with at least 3
gigabit ethernet
ports to perform services like redundancy or load balancing using the
multiwan packet?
Multiwan seems discontinued, you should use the mwan3 package:
https://wiki.openwrt.org/doc/howto/mwan3
I'd be interested in hearing your experience and
a
recommendation of what to buy, and how to configure the ports. Guido
(busy sailing these days) told me that the hard part is configuring the
ports, and that each configuration is hardware-specific...
I tried once, using a TpLink WDR3600 with plain OpenWrt (not LibreMesh)
for trying to have a stable connection out of two unreliable WWANs
(connected to the WDR3600 via cable, while WDR3600 was the AP and mwan3)
and it worked, no much configuration was needed indeed.
Ciao,
Ilario
30 Jul
30 Jul
1:10 p.m.
thanks to guifipedro, we got it working on the tplink wr1043n using
openwrt... As Guido said, the tricky part was to get both blue and yellow
ports to work. If anyone wants to see the configuration for the wr1043n,
i've attached:
/etc/config/dhcp
/etc/config/mwan3
/etc/config/network
/etc/config/system
/etc/config/wireless
thanks!
On Sat, Jul 28, 2018 at 10:59 PM, Ilario Gelmetti <iochesonome(a)gmail.com>
wrote:
On 07/28/2018 01:31 PM, Brian Russell wrote:
Has anyone managed to get a router with at least
3 gigabit ethernet
ports to perform services like redundancy or load balancing using the
multiwan packet?
Multiwan seems discontinued, you should use the mwan3 package:
https://wiki.openwrt.org/doc/howto/mwan3
I'd be interested in hearing your experience
and a
recommendation of what to buy, and how to configure the ports. Guido
(busy sailing these days) told me that the hard part is configuring the
ports, and that each configuration is hardware-specific...
I tried once, using a TpLink WDR3600 with plain OpenWrt (not LibreMesh)
for trying to have a stable connection out of two unreliable WWANs
(connected to the WDR3600 via cable, while WDR3600 was the AP and mwan3)
and it worked, no much configuration was needed indeed.
Ciao,
Ilario
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
5 Aug
5 Aug
9:36 p.m.
oops, no, didn't quite work, had all kinds of problems that I couldn't
solve. But i DID get it to work on an archer c7 v2, which a fellow in
france had very thoroughly documented, here is a fork of the repository,
working great using openwrt 18.06:
https://github.com/vdxlab/openwrt-mwan-config
cheers!
On Mon, Jul 30, 2018 at 3:10 PM, Brian Russell <brinerustle(a)gmail.com>
wrote:
thanks to guifipedro, we got it working on the tplink
wr1043n using
openwrt... As Guido said, the tricky part was to get both blue and yellow
ports to work. If anyone wants to see the configuration for the wr1043n,
i've attached:
/etc/config/dhcp
/etc/config/mwan3
/etc/config/network
/etc/config/system
/etc/config/wireless
thanks!
On Sat, Jul 28, 2018 at 10:59 PM, Ilario Gelmetti <iochesonome(a)gmail.com>
wrote:
On 07/28/2018 01:31 PM, Brian Russell wrote:
Has anyone managed to get a router with at least
3 gigabit ethernet
ports to perform services like redundancy or load balancing using the
multiwan packet?
Multiwan seems discontinued, you should use the mwan3 package:
https://wiki.openwrt.org/doc/howto/mwan3
I'd be interested in hearing your experience
and a
recommendation of what to buy, and how to configure the ports. Guido
(busy sailing these days) told me that the hard part is configuring the
ports, and that each configuration is hardware-specific...
I tried once, using a TpLink WDR3600 with plain OpenWrt (not LibreMesh)
for trying to have a stable connection out of two unreliable WWANs
(connected to the WDR3600 via cable, while WDR3600 was the AP and mwan3)
and it worked, no much configuration was needed indeed.
Ciao,
Ilario
_______________________________________________
lime-users mailing list
lime-users(a)lists.libremesh.org
https://lists.libremesh.org/mailman/listinfo/lime-users
2102
days inactive
2110
days old
lime-users@lists.libremesh.org
3 comments
2 participants
participants (2)
-
Brian Russell -
Ilario Gelmetti