Hey sisters,
Let me share some good news for community networks -and bad ones for ISPs:
0.- Bitmessage has been working on LAN peer auto-discovery. It is
already in v0.6 branch, we tested it and it works.
1.- Retroshare will finally have asynchronous messaging working
(Retroshare already has LAN peer auto-discovery).
2.- Impressive ZeroNet is aware of the importance of LAN peer
auto-discovery and they are going to add this feature.
On 06/08/18 14:44, Brian Russell wrote:
>
> On Mon, Aug 6, 2018 at 1:33 PM, amuza <amuza(a)riseup.net
> <mailto:amuza@riseup.net>> wrote:
>
>
> On 06/08/18 09:38, Ilario Gelmetti wrote:
> > On 08/05/2018 11:43 PM, Brian Russell wrote:
> >> if you use the command "sysupgrade" it should keep your config
> files.
> >> (sysupgrade -n overwrites the config files). from the GUI, just
> tick the
> >> box that says keep the config files.
> > I suspect that what Brian says was the problem:
> > for removing bad old configurations you should use the "-n"
> option on
> > "sysupgrade" command or select the checkbox for not keeping the
> > configuration in the web interface.
> > Ciao,
> > Ilario
> >
> Hi Ilario!
> I did my upgrades with the -n option.
>
>
> that's probably why the device got deconfigured. the -n option also
> removes *good* old configurations as well. ;-)
The -n option removes the old configuration and gives you the default
one, which is supposed to work.
>
>
> I will try to compare its files to the ones of a working LiMe
> 17.06 router.
>
I did the comparison and every file seems to be properly configured.
Now I have flashed the router with its default stable 17.06 image with
generic settings from the "Precompiled Binaries" section at
libremesh.org and got the same issue! Every SSID is in "unknown" mode.
> Cheers
>
> _______________________________________________
> lime-users mailing list
> lime-users(a)lists.libremesh.org <mailto:lime-users@lists.libremesh.org>
> https://lists.libremesh.org/mailman/listinfo/lime-users
> <https://lists.libremesh.org/mailman/listinfo/lime-users>
>
>
Hi,
I had a node working ok with LiMe 16.07. It is a TP-Link WR2543ND.
I tried to upgrade it to LiMe 17.06 using the sysupgrade.bin image from
my network profile on chef.libremesh.org
After restarting it did not publish any SSID. I connected through
Ethernet and I was able to go into luci with my browser (http://anygw/).
In Administration > Network > Wireless I could see the SSID modes were
on "Client"
Then I tried by upgrading it with the factory.bin image.
I had the same results, but this time I see the mode for the three SSIDs
is "Unknown".
- How do I check those things (like interface status) through commands?
- Any suggestion on how to troubleshoot to make this router work with LiMe 17.06? There must be something wrong in the image.
Cheers!
On 05/08/18 23:45, Brian Russell wrote:
> cetere, ĉu vi parolas esperanton? Mi rimarkis ke via apodo estas
> amuza...;-)
>
>
Hi!
I'd like to but I don't speak Esperanto, despite my name.
>
> On Sun, Aug 5, 2018 at 11:43 PM, Brian Russell <brinerustle(a)gmail.com
> <mailto:brinerustle@gmail.com>> wrote:
>
> you could also try upgrading to the 18.06, it's now stable:
>
> http://downloads.lede-project.org/releases/18.06.0/targets/ar71xx/generic/o…
> <http://downloads.lede-project.org/releases/18.06.0/targets/ar71xx/generic/o…>
>
>
But that's an OpenWRT image, or is it a LiMe one?
>
> On Sun, Aug 5, 2018 at 11:29 PM, Brian Russell
> <brinerustle(a)gmail.com <mailto:brinerustle@gmail.com>> wrote:
>
> for interface status, a good command is:
>
> ip a s
>
> this means ip address show.
>
Thank you, I will try it.
>
>
> On Sun, Aug 5, 2018 at 7:34 PM, amuza <amuza(a)riseup.net
> <mailto:amuza@riseup.net>> wrote:
>
>
> Hi,
>
> I had a node working ok with LiMe 16.07. It is a TP-Link
> WR2543ND.
>
> I tried to upgrade it to LiMe 17.06 using the
> sysupgrade.bin image from
> my network profile on chef.libremesh.org
> <http://chef.libremesh.org>
>
> After restarting it did not publish any SSID. I connected
> through
> Ethernet and I was able to go into luci with my browser
> (http://anygw/).
> In Administration > Network > Wireless I could see the
> SSID modes were
> on "Client"
>
> Then I tried by upgrading it with the factory.bin image.
> I had the same results, but this time I see the mode for
> the three SSIDs
> is "Unknown".
>
> - How do I check those things (like interface status)
> through commands?
> - Any suggestion on how to troubleshoot to make this
> router work with LiMe 17.06? There must be something wrong
> in the image.
>
> Cheers!
>
>
>
> _______________________________________________
> lime-users mailing list
> lime-users(a)lists.libremesh.org
> <mailto:lime-users@lists.libremesh.org>
> https://lists.libremesh.org/mailman/listinfo/lime-users
> <https://lists.libremesh.org/mailman/listinfo/lime-users>
>
>
>
>
Has anyone managed to get a router with at least 3 gigabit ethernet ports
to perform services like redundancy or load balancing using the multiwan
packet? I'd be interested in hearing your experience and a recommendation
of what to buy, and how to configure the ports. Guido (busy sailing these
days) told me that the hard part is configuring the ports, and that each
configuration is hardware-specific...
Has anyone tried with the tplink wr1043n? It's the cheapest gigabit machine
i have been able to find....
